3 Band Equalizer                     

3_band_EQ.gif (9960 bytes)

  ��� �������� ������� �������� ����� ����� ������ , �� �� ����� �������� �� ���������� ��� �������, ������� ��� ������ ����������, ���� ���������� �������. � �������� /������� ������ �� ��������� ���� ������� ��� � 18 dB/Oct. ��� ������� � ���������� ����� ���������� � 15V, ���� ������ �� ������������ ��� �� ���� ���������� +9 ��� +30V, ����� �� �������� � ���������� 4 ��� IC1, ��� 0V ��� �������� �� ������� �� ���� �������� ��� ����� 2, �������� �� ���� ��� ����������� ���� �� ������������ ������ ��� IC1, ��� 5 ��� 3 ����������, �� ����� ����� ��� ���������� ���� ��.


  A classic circuit of regulation of tone of three way, with which we can regulate low, mid and high frequencies, of acoustic signal. The boost/cut can be regulated in the range of � 18 dB/oct. In the circuit the supply is � 15V, but can be also supplied with alone supply + 9 until + 30V, it is enough it is connected pin the 4 IC1, in the 0V and is connected the circuit with as it appears in fig. 2, giving half the supply in the not inverting entry of IC1, in the 5 and 3 equivalents, which are henceforth not connected in the ground.

3 Band EQ with single supply

R1-2= 47Kohms C1-11= 10uF 25V C8= 1.2nF 63V MKT
R3-4-5-12-13= 10Kohms C2= 33pF ceramic C9-10= 100nF 63V MKT
R6-7= 3.3Kohms C3= 2.2uF 63V MKT C12=47uF 25V
R8-9= 1.8Kohms C4= 47nF 63V MKT RV1-2= 100Kohms Lin.
R10= 270ohms C5-7= 4.7nF 63V MKT RV3= 470Kohms Lin.
R11= 22Kohms C6= 22nF 63V MKT IC1= TL072, NE5532

Sam Electronic Circuits 10/01