Photo detector

Photodetector.gif (5986 bytes)

�� ������� ���� ����� ������ ������ ������, ���� ������� ������� ��������, ����� ������ ���� ���������� �����. ������ �� ����� ������ �� ������� ������ ����, ���� ����� �� �������. � ������ ��� ����� ������� �� ������ TTL ��� ����� ������ ������ ������, ���� �� �������������� Q1, ��������� ���. �� ��� ������������� ��������� RV1, �������� �� ���������� ��� ���������� ��� �� ����.

This circuit give low level output, when exist enough lighting, that is a detector of light. It can give, say ,command turn on somebodies lights, when fall the dark. His exit is compatible with TTL level and it give low logic level, when phototransistor Q1, detect light. With adjustable resistor RV1, we can regulate the sensitivity that it will have. Elektor'87

Part List

R1=270ohm C1-2=100nF 100V ceramic IC2=74HCT13
R2-5=1Kohm RV1=10Kohm trimmer Q1=BP103 Phototransistor Siemens
R3=10Kohm D1-2=1N4148
R4=100ohm IC1=CA3130

Sam Electronic Circuits 3/02